-=+* WARNING *+=- -=+* WARNING *+=-


Although Install Manager provides a convenient way for installing
and upgrading SWORD components, it also uses a systematic method
for accessing sites which gives packet sniffers a target to lock
into for singling out users. 


IF YOU LIVE IN A PERSECUTED COUNTRY AND DO NOT WISH TO RISK DETECTION,
YOU SHOULD *NOT* USE INSTALL MANAGER'S REMOTE SOURCE FEATURES.


if you understand this and are willing to enable remote source features
then type yes at the prompt

enable? [no] 

Initialized basic config file at [/home/karl/.sword/InstallMgr/InstallMgr.conf]
with remote source features ENABLED

***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action. 
***** destPath: /home/karl/.sword/InstallMgr/ftp.crosswire.org/mods.d.tar.gz 
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw/mods.d.tar.gz 
* About to connect() to ftp.crosswire.org port 21 (#0)
*   Trying 64.140.154.250... * connected
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
< 220 (vsFTPd 2.0.5)
> USER ftp
< 331 Please specify the password.
> PASS installmgr@user.com
< 230 Login successful.
> PWD
< 257 "/"
* Entry path is '/'
> CWD pub
< 250 Directory successfully changed.
> CWD sword
< 250 Directory successfully changed.
> CWD raw
< 250 Directory successfully changed.
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||20898|)
*   Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 20898
> TYPE I
< 200 Switching to Binary mode.
> SIZE mods.d.tar.gz
< 213 82960
> RETR mods.d.tar.gz
< 150 Opening BINARY mode data connection for mods.d.tar.gz (82960 bytes).
* Maxdownload = -1
* Getting file with size: 82960
* Remembering we are in dir pub/sword/raw/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action. 
> QUIT
< 221 Goodbye.
* Closing connection #0

Remote Source Refreshed

***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action. 
***** destPath: dirlist 
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw// 
* About to connect() to ftp.crosswire.org port 21 (#0)
*   Trying 64.140.154.250... * connected
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
< 220 (vsFTPd 2.0.5)
> USER ftp
< 331 Please specify the password.
> PASS installmgr@user.com
< 230 Login successful.
> PWD
< 257 "/"
* Entry path is '/'
> CWD pub
< 250 Directory successfully changed.
> CWD sword
< 250 Directory successfully changed.
> CWD raw
< 250 Directory successfully changed.
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||41195|)
*   Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 41195
> TYPE A
< 200 Switching to ASCII mode.
> LIST
< 150 Here comes the directory listing.
* Maxdownload = -1
* Remembering we are in dir pub/sword/raw//
< 226 Directory send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action. 
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action. 
***** destPath: dirlist 
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/ 
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> CWD /
< 250 Directory successfully changed.
> CWD pub
< 250 Directory successfully changed.
> CWD sword
< 250 Directory successfully changed.
> CWD raw
< 250 Directory successfully changed.
> CWD dead
< 250 Directory successfully changed.
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||21412|)
*   Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 21412
> LIST
< 150 Here comes the directory listing.
* Maxdownload = -1
* Remembering we are in dir pub/sword/raw//dead/
< 226 Directory send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action. 
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action. 
***** destPath: /home/karl/.sword/modules/texts/ztext/kjv/dead/dra.conf 
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/dra.conf 
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||8658|)
*   Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 8658
> TYPE I
< 200 Switching to Binary mode.
> SIZE dra.conf
< 213 272
> RETR dra.conf
< 150 Opening BINARY mode data connection for dra.conf (272 bytes).
* Maxdownload = -1
* Getting file with size: 272
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action. 
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action. 
***** destPath: /home/karl/.sword/modules/texts/ztext/kjv/dead/hitchcock.conf 
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/hitchcock.conf 
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||20778|)
*   Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 20778
> SIZE hitchcock.conf
< 213 938
> RETR hitchcock.conf
< 150 Opening BINARY mode data connection for hitchcock.conf (938 bytes).
* Maxdownload = -1
* Getting file with size: 938
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action. 
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action. 
***** destPath: /home/karl/.sword/modules/texts/ztext/kjv/dead/kekchi.conf 
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/kekchi.conf 
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||5511|)
*   Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 5511
> SIZE kekchi.conf
< 213 282
> RETR kekchi.conf
< 150 Opening BINARY mode data connection for kekchi.conf (282 bytes).
* Maxdownload = -1
* Getting file with size: 282
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action. 
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action. 
***** destPath: /home/karl/.sword/modules/texts/ztext/kjv/dead/lightfoot.conf 
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/lightfoot.conf 
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||10221|)
*   Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 10221
> SIZE lightfoot.conf
< 213 447
> RETR lightfoot.conf
< 150 Opening BINARY mode data connection for lightfoot.conf (447 bytes).
* Maxdownload = -1
* Getting file with size: 447
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action. 
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action. 
***** destPath: /home/karl/.sword/modules/texts/ztext/kjv/dead/luther.conf 
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/luther.conf 
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||49865|)
*   Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 49865
> SIZE luther.conf
< 213 364
> RETR luther.conf
< 150 Opening BINARY mode data connection for luther.conf (364 bytes).
* Maxdownload = -1
* Getting file with size: 364
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action. 
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action. 
***** destPath: /home/karl/.sword/modules/texts/ztext/kjv/dead/nave.conf 
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/nave.conf 
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||51877|)
*   Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 51877
> SIZE nave.conf
< 213 1284
> RETR nave.conf