[bt-devel] Documentation - makefiles - new bug
Fred Saalbach
bt-devel@crosswire.org
Tue, 11 Dec 2001 14:24:37 -0500
This is a multi-part message in MIME format.
--------------3EA4FCCD631BBD7D624FCC74
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
Attached is ~/bibletime-doc/Makefile the atttachment is called Makefile
and ~/bibletime-doc/docs/Makefile The attachment is called Makefile2
Fred
Martin Gruner wrote:
>
> Could you please send this Makefile?
>
> Martin
>
> > Martin Gruner wrote:
> > It almost works now, following a fresh update I ran the script,
> > gen_am.sh, followed by
> >
> > export QTDIR=/lib
> > export KDEDIR=/
> > export PATH=$KDEDIR/bin:$PATH
> > make -f Makefile.cvs
> > ./configure
> > make
> >
> > after make, there was a problem.
> >
> > [fks00@localhost bibletime-doc]$ make
> > Makefile:274: *** missing separator. Stop.
> > [fks00@localhost bibletime-doc]$
> >
> > probably a typo in the script i guess?
> >
> > This is a good streightforward way to regenerate the makefiles.
> >
> > Thanks
> > Fred
> >
> > > Hey Fred,
> > >
> > > > What I was trying to do was to was create a target in both the
> > > > xml.docbook and ~.html forms in each language. My thought was that the
> > > > programmers would want to be able to target something that would have
> > > > the desired filename, rather than targeting a broken link.
> > > >
> > > > If I understand correctly you would prefer to have the html and unicode
> > > > directories empty instead of either a "target" file or "out of date
> > > > translation".
> > >
> > > Yes.
> > >
> > > > Tonight I will strip out the "target files" This will leave only the
> > > > German having html files, these being slightly out of date. I am going
> > > > to remove the german .po files as I have made some changes to the
> > > > english.
> > >
> > > Cool.
> > > Actually, now it works as follows: whenever one of our specific
> > > subdirectories exists (e.g. cs/handbook/html), the gen_am.sh file will
> > > add it to the install process. Therefore the corresponding KDE doc dir
> > > (cs/handbook) will be filled with symlinks to the english files.
> > > Either you disable the language in gen_am.dat, or you delete the html
> > > directory (in this example), to prevent this directory from being
> > > installed.
> > >
> > > Martin
--
II Chronicles 7:14 (The Webster Bible)
If my people, who are called by my name, shall humble themselves, and
pray, and seek my face, and turn from their wicked ways; then will I
hear from heaven, and will forgive their sin, and will heal their land.
Luther Bible
Und mein Volk sich demütigt, das nach meinem Namen genannt ist, daß sie
beten und mein Angesicht suchen und sich von ihren bösen Wegen bekehren
werden: so will ich vom Himmel hören und ihre Sünde vergeben und ihr
Land heilen.
Spanish Reina-Valera Bible
Si se humillare mi pueblo, sobre los cuales ni nombre es invocado, y
oraren, y buscaren mi rostro, y se convirtieren de sus malos caminos;
entonces yo oiré desde los cielos, y perdonaré sus pecados, y sanaré su
tierra.
--------------3EA4FCCD631BBD7D624FCC74
Content-Type: text/plain; charset=us-ascii;
name="Makefile"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="Makefile"
# Generated automatically from Makefile.in by config.pl.
# KDE tags expanded automatically by am_edit - $Revision: 1.1.1.1 $
# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
SHELL = @SHELL@
srcdir = .
top_srcdir = .
VPATH = .
prefix = @prefix@
exec_prefix = @exec_prefix@
#>-
bindir = @bindir@
#>+ 3
DEPDIR = .deps
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
DESTDIR =
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@
INSTALL = /usr/bin/install -c -p
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = @build_alias@
build_triplet = @build@
host_alias = @host_alias@
host_triplet = @host@
target_alias = @target_alias@
target_triplet = @target@
ARTSCCONFIG = @ARTSCCONFIG@
AS = @AS@
AUTODIRS = @AUTODIRS@
CC = @CC@
CONF_FILES = @CONF_FILES@
CPP = @CPP@
CXX = @CXX@
CXXCPP = @CXXCPP@
DCOPIDL = @DCOPIDL@
DCOPIDL2CPP = @DCOPIDL2CPP@
DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@
DLLTOOL = @DLLTOOL@
DPMSINC = @DPMSINC@
DPMSLIB = @DPMSLIB@
EXEEXT = @EXEEXT@
GCJ = @GCJ@
GCJFLAGS = @GCJFLAGS@
GLINC = @GLINC@
GLLIB = @GLLIB@
GMSGFMT = @GMSGFMT@
IDL = @IDL@
IDL_DEPENDENCIES = @IDL_DEPENDENCIES@
JAR = @JAR@
JAVAC = @JAVAC@
JAVAH = @JAVAH@
JVMLIBS = @JVMLIBS@
KDECONFIG = @KDECONFIG@
KDE_CXXFLAGS = @KDE_CXXFLAGS@
KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@
KDE_INCLUDES = @KDE_INCLUDES@
KDE_LDFLAGS = @KDE_LDFLAGS@
KDE_PLUGIN = @KDE_PLUGIN@
KDE_RPATH = @KDE_RPATH@
KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@
KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@
KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@
KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@
KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@
LIBCOMPAT = @LIBCOMPAT@
LIBCRYPT = @LIBCRYPT@
LIBDL = @LIBDL@
LIBGEN = @LIBGEN@
LIBJPEG = @LIBJPEG@
LIBMICO = @LIBMICO@
LIBOBJS = @LIBOBJS@
LIBPNG = @LIBPNG@
LIBPTHREAD = @LIBPTHREAD@
LIBPYTHON = @LIBPYTHON@
LIBQIMGIO = @LIBQIMGIO@
LIBRESOLV = @LIBRESOLV@
LIBSHADOW = @LIBSHADOW@
LIBSM = @LIBSM@
LIBSOCKET = @LIBSOCKET@
LIBTIFF = @LIBTIFF@
LIBTOOL = @LIBTOOL@
LIBUCB = @LIBUCB@
LIBUTIL = @LIBUTIL@
LIBXINERAMA = @LIBXINERAMA@
LIBZ = @LIBZ@
LIB_KAB = @LIB_KAB@
LIB_KDECORE = @LIB_KDECORE@
LIB_KDEUI = @LIB_KDEUI@
LIB_KFILE = @LIB_KFILE@
LIB_KFM = @LIB_KFM@
LIB_KFORMULA = @LIB_KFORMULA@
LIB_KHTML = @LIB_KHTML@
LIB_KIMGIO = @LIB_KIMGIO@
LIB_KIO = @LIB_KIO@
LIB_KPARTS = @LIB_KPARTS@
LIB_KSPELL = @LIB_KSPELL@
LIB_KSYCOCA = @LIB_KSYCOCA@
LIB_KWRITE = @LIB_KWRITE@
LIB_QT = @LIB_QT@
LIB_SMB = @LIB_SMB@
LIB_X11 = @LIB_X11@
LN_S = @LN_S@
MAKEINFO = @MAKEINFO@
MCOPIDL = @MCOPIDL@
MEINPROC = @MEINPROC@
MICO_INCLUDES = @MICO_INCLUDES@
MICO_LDFLAGS = @MICO_LDFLAGS@
MOC = @MOC@
MSGFMT = @MSGFMT@
NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@
NOREPO = @NOREPO@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PAMLIBS = @PAMLIBS@
PASSWDLIBS = @PASSWDLIBS@
PYTHONINC = @PYTHONINC@
PYTHONLIB = @PYTHONLIB@
PYTHONMODDIR = @PYTHONMODDIR@
QT_INCLUDES = @QT_INCLUDES@
QT_LDFLAGS = @QT_LDFLAGS@
RANLIB = @RANLIB@
REPO = @REPO@
SETUIDFLAGS = @SETUIDFLAGS@
STRIP = @STRIP@
TOPSUBDIRS = docs po
UIC = @UIC@
USER_INCLUDES = @USER_INCLUDES@
USER_LDFLAGS = @USER_LDFLAGS@
USE_EXCEPTIONS = @USE_EXCEPTIONS@
USE_RTTI = @USE_RTTI@
USE_THREADS = @USE_THREADS@
VERSION = @VERSION@
XGETTEXT = @XGETTEXT@
XPMINC = @XPMINC@
XPMLIB = @XPMLIB@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_INCLUDES = @X_INCLUDES@
X_LDFLAGS = @X_LDFLAGS@
X_PRE_LIBS = @X_PRE_LIBS@
all_includes = @all_includes@
all_libraries = @all_libraries@
idldir = @idldir@
jni_includes = @jni_includes@
kde_appsdir = @kde_appsdir@
kde_bindir = @kde_bindir@
kde_confdir = @kde_confdir@
kde_datadir = @kde_datadir@
kde_htmldir = @kde_htmldir@
kde_icondir = @kde_icondir@
kde_includes = @kde_includes@
kde_libraries = @kde_libraries@
kde_libs_htmldir = @kde_libs_htmldir@
kde_libs_prefix = @kde_libs_prefix@
kde_locale = @kde_locale@
kde_mimedir = @kde_mimedir@
kde_moduledir = @kde_moduledir@
kde_servicesdir = @kde_servicesdir@
kde_servicetypesdir = @kde_servicetypesdir@
kde_sounddir = @kde_sounddir@
kde_templatesdir = @kde_templatesdir@
kde_wallpaperdir = @kde_wallpaperdir@
micodir = @micodir@
qt_includes = @qt_includes@
qt_libraries = @qt_libraries@
x_includes = @x_includes@
x_libraries = @x_libraries@
SUBDIRS = docs po admin .
EXTRA_DIST = README.in README INSTALL.in INSTALL configure.in.in configure.in Makefile.cvs
# not a GNU package. You can remove this line, if
# have all needed files, that a GNU package needs
AUTOMAKE_OPTIONS = foreign
datadir = $(kde_appsdir)/Applications
MAINTAINERCLEANFILES = configure.files subdirs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
CONFIG_CLEAN_FILES = README INSTALL
DIST_COMMON = README INSTALL INSTALL.in Makefile.am Makefile.in \
README.in acinclude.m4 aclocal.m4 configure configure.in
#>- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
#>+ 4
KDE_DIST=stamp-h.in
DISTFILES= $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)
TAR = gtar
GZIP_ENV = --best
#>- all: all-redirect
#>+ 1
all: docs-am all-redirect
.SUFFIXES:
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
#>- cd $(top_srcdir) && $(AUTOMAKE) --foreign ./Makefile
#>+ 2
cd $(top_srcdir) && $(AUTOMAKE) --foreign ./Makefile
cd $(top_srcdir) && perl admin/am_edit Makefile.in
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
cd $(top_builddir) \
&& CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
$(ACLOCAL_M4): configure.in acinclude.m4
cd $(srcdir) && $(ACLOCAL)
config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
cd $(srcdir) && $(AUTOCONF)
README: $(top_builddir)/config.status README.in
cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
INSTALL: $(top_builddir)/config.status INSTALL.in
cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
@SET_MAKE@
all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
rev="$$subdir $$rev"; \
test "$$subdir" != "." || dot_seen=yes; \
done; \
test "$$dot_seen" = "no" && rev=". $$rev"; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP)
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
here=`pwd` && cd $(srcdir) \
&& mkid -f$$here/ID $$unique $(LISP)
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
mostlyclean-tags:
clean-tags:
distclean-tags:
-rm -f TAGS ID
maintainer-clean-tags:
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
-rm -rf $(distdir)
GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
mkdir $(distdir)/=build
mkdir $(distdir)/=inst
dc_install_base=`cd $(distdir)/=inst && pwd`; \
cd $(distdir)/=build \
&& ../configure --srcdir=.. --prefix=$$dc_install_base \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) dist
-rm -rf $(distdir)
@banner="$(distdir).tar.gz is ready for distribution"; \
dashes=`echo "$$banner" | sed s/./=/g`; \
echo "$$dashes"; \
echo "$$banner"; \
echo "$$dashes"
dist: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
dist-all: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
distdir: $(DISTFILES)
-rm -rf $(distdir)
mkdir $(distdir)
-chmod 777 $(distdir)
here=`cd $(top_builddir) && pwd`; \
top_distdir=`cd $(distdir) && pwd`; \
distdir=`cd $(distdir) && pwd`; \
cd $(top_srcdir) \
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign ./Makefile
@for file in $(DISTFILES); do \
d=$(srcdir); \
if test -d $$d/$$file; then \
cp -pr $$d/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
for subdir in $(SUBDIRS); do \
if test "$$subdir" = .; then :; else \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
chmod 777 $(distdir)/$$subdir; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-hook
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-exec-am:
install-exec: install-exec-recursive
install-data-am: install-data-local
install-data: install-data-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am:
uninstall: uninstall-recursive
all-am: Makefile
all-redirect: all-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
mostlyclean-am: mostlyclean-tags mostlyclean-generic
mostlyclean: mostlyclean-recursive
clean-am: clean-tags clean-generic mostlyclean-am
#>- clean: clean-recursive
#>+ 1
clean: kde-rpo-clean clean-recursive
distclean-am: distclean-tags distclean-generic clean-am
-rm -f libtool
distclean: distclean-recursive
-rm -f config.status
maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \
distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
maintainer-clean: maintainer-clean-recursive
-rm -f config.status
.PHONY: install-data-recursive uninstall-data-recursive \
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
uninstalldirs-recursive all-recursive check-recursive \
installcheck-recursive info-recursive dvi-recursive \
mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
install-exec install-data-local install-data-am install-data install-am \
install uninstall-am uninstall all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean
#data_DATA = bibletime.desktop
$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in
@cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4
$(top_srcdir)/configure.in: $(top_srcdir)/configure.files $(shell test -f $(top_srcdir)/configure.files && cat $(top_srcdir)/configure.files)
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in
$(top_srcdir)/subdirs:
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs
$(top_srcdir)/configure.files:
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.files
install-data-local:
chmod 755 $(DESTDIR)$(kde_datadir)/bibletime -R
dist-hook:
cd $(top_distdir) && $(MAKE) -f Makefile.cvs
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
#>+ 2
docs-am:
#>+ 5
force-reedit:
cd $(top_srcdir) && $(AUTOMAKE) --foreign ./Makefile
cd $(top_srcdir) && perl admin/am_edit Makefile.in
#>+ 2
final:
$(MAKE) all-am
#>+ 2
no-final:
$(MAKE) all-am
#>+ 3
cvs-clean:
$(MAKE) -f $(top_srcdir)/admin/Makefile.common cvs-clean
#>+ 3
kde-rpo-clean:
-rm -f *.rpo
--------------3EA4FCCD631BBD7D624FCC74
Content-Type: text/plain; charset=us-ascii;
name="Makefile2"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="Makefile2"
# Generated automatically from Makefile.in by config.pl.
# KDE tags expanded automatically by am_edit - $Revision: 1.1.1.1 $
# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
# this Makefile.am was automatically generated by bibletime/docs/gen_am.sh
# please do not edit this file but rather run the script to update
SHELL = @SHELL@
srcdir = .
top_srcdir = ..
VPATH = .
prefix = @prefix@
exec_prefix = @exec_prefix@
#>-
bindir = @bindir@
#>+ 3
DEPDIR = .deps
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
DESTDIR =
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@
INSTALL = /usr/bin/install -c -p
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = @build_alias@
build_triplet = @build@
host_alias = @host_alias@
host_triplet = @host@
target_alias = @target_alias@
target_triplet = @target@
ARTSCCONFIG = @ARTSCCONFIG@
AS = @AS@
AUTODIRS = @AUTODIRS@
CC = @CC@
CONF_FILES = @CONF_FILES@
CPP = @CPP@
CXX = @CXX@
CXXCPP = @CXXCPP@
DCOPIDL = @DCOPIDL@
DCOPIDL2CPP = @DCOPIDL2CPP@
DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@
DLLTOOL = @DLLTOOL@
DPMSINC = @DPMSINC@
DPMSLIB = @DPMSLIB@
EXEEXT = @EXEEXT@
GCJ = @GCJ@
GCJFLAGS = @GCJFLAGS@
GLINC = @GLINC@
GLLIB = @GLLIB@
GMSGFMT = @GMSGFMT@
IDL = @IDL@
IDL_DEPENDENCIES = @IDL_DEPENDENCIES@
JAR = @JAR@
JAVAC = @JAVAC@
JAVAH = @JAVAH@
JVMLIBS = @JVMLIBS@
KDECONFIG = @KDECONFIG@
KDE_CXXFLAGS = @KDE_CXXFLAGS@
KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@
KDE_INCLUDES = @KDE_INCLUDES@
KDE_LDFLAGS = @KDE_LDFLAGS@
KDE_PLUGIN = @KDE_PLUGIN@
KDE_RPATH = @KDE_RPATH@
KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@
KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@
KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@
KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@
KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@
LIBCOMPAT = @LIBCOMPAT@
LIBCRYPT = @LIBCRYPT@
LIBDL = @LIBDL@
LIBGEN = @LIBGEN@
LIBJPEG = @LIBJPEG@
LIBMICO = @LIBMICO@
LIBOBJS = @LIBOBJS@
LIBPNG = @LIBPNG@
LIBPTHREAD = @LIBPTHREAD@
LIBPYTHON = @LIBPYTHON@
LIBQIMGIO = @LIBQIMGIO@
LIBRESOLV = @LIBRESOLV@
LIBSHADOW = @LIBSHADOW@
LIBSM = @LIBSM@
LIBSOCKET = @LIBSOCKET@
LIBTIFF = @LIBTIFF@
LIBTOOL = @LIBTOOL@
LIBUCB = @LIBUCB@
LIBUTIL = @LIBUTIL@
LIBXINERAMA = @LIBXINERAMA@
LIBZ = @LIBZ@
LIB_KAB = @LIB_KAB@
LIB_KDECORE = @LIB_KDECORE@
LIB_KDEUI = @LIB_KDEUI@
LIB_KFILE = @LIB_KFILE@
LIB_KFM = @LIB_KFM@
LIB_KFORMULA = @LIB_KFORMULA@
LIB_KHTML = @LIB_KHTML@
LIB_KIMGIO = @LIB_KIMGIO@
LIB_KIO = @LIB_KIO@
LIB_KPARTS = @LIB_KPARTS@
LIB_KSPELL = @LIB_KSPELL@
LIB_KSYCOCA = @LIB_KSYCOCA@
LIB_KWRITE = @LIB_KWRITE@
LIB_QT = @LIB_QT@
LIB_SMB = @LIB_SMB@
LIB_X11 = @LIB_X11@
LN_S = @LN_S@
MAKEINFO = @MAKEINFO@
MCOPIDL = @MCOPIDL@
MEINPROC = @MEINPROC@
MICO_INCLUDES = @MICO_INCLUDES@
MICO_LDFLAGS = @MICO_LDFLAGS@
MOC = @MOC@
MSGFMT = @MSGFMT@
NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@
NOREPO = @NOREPO@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PAMLIBS = @PAMLIBS@
PASSWDLIBS = @PASSWDLIBS@
PYTHONINC = @PYTHONINC@
PYTHONLIB = @PYTHONLIB@
PYTHONMODDIR = @PYTHONMODDIR@
QT_INCLUDES = @QT_INCLUDES@
QT_LDFLAGS = @QT_LDFLAGS@
RANLIB = @RANLIB@
REPO = @REPO@
SETUIDFLAGS = @SETUIDFLAGS@
STRIP = @STRIP@
TOPSUBDIRS = docs po
UIC = @UIC@
USER_INCLUDES = @USER_INCLUDES@
USER_LDFLAGS = @USER_LDFLAGS@
USE_EXCEPTIONS = @USE_EXCEPTIONS@
USE_RTTI = @USE_RTTI@
USE_THREADS = @USE_THREADS@
VERSION = @VERSION@
XGETTEXT = @XGETTEXT@
XPMINC = @XPMINC@
XPMLIB = @XPMLIB@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_INCLUDES = @X_INCLUDES@
X_LDFLAGS = @X_LDFLAGS@
X_PRE_LIBS = @X_PRE_LIBS@
all_includes = @all_includes@
all_libraries = @all_libraries@
idldir = @idldir@
jni_includes = @jni_includes@
kde_appsdir = @kde_appsdir@
kde_bindir = @kde_bindir@
kde_confdir = @kde_confdir@
kde_datadir = @kde_datadir@
kde_htmldir = @kde_htmldir@
kde_icondir = @kde_icondir@
kde_includes = @kde_includes@
kde_libraries = @kde_libraries@
kde_libs_htmldir = @kde_libs_htmldir@
kde_libs_prefix = @kde_libs_prefix@
kde_locale = @kde_locale@
kde_mimedir = @kde_mimedir@
kde_moduledir = @kde_moduledir@
kde_servicesdir = @kde_servicesdir@
kde_servicetypesdir = @kde_servicetypesdir@
kde_sounddir = @kde_sounddir@
kde_templatesdir = @kde_templatesdir@
kde_wallpaperdir = @kde_wallpaperdir@
micodir = @micodir@
qt_includes = @qt_includes@
qt_libraries = @qt_libraries@
x_includes = @x_includes@
x_libraries = @x_libraries@
SUBDIRS = cs de en es it nl no sk
mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
CONFIG_CLEAN_FILES =
DIST_COMMON = Makefile.am Makefile.in
#>- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
#>+ 4
KDE_DIST=bibletime1-0poFiles.zip documentation-links.html gen_am.sh gen_am.dat
DISTFILES= $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)
TAR = gtar
GZIP_ENV = --best
#>- all: all-redirect
#>+ 1
all: docs-am all-redirect
.SUFFIXES:
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
#>- cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/Makefile
#>+ 2
cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/Makefile
cd $(top_srcdir) && perl admin/am_edit docs/Makefile.in
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
cd $(top_builddir) \
&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
@SET_MAKE@
all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
rev="$$subdir $$rev"; \
test "$$subdir" != "." || dot_seen=yes; \
done; \
test "$$dot_seen" = "no" && rev=". $$rev"; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP)
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
here=`pwd` && cd $(srcdir) \
&& mkid -f$$here/ID $$unique $(LISP)
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
mostlyclean-tags:
clean-tags:
distclean-tags:
-rm -f TAGS ID
maintainer-clean-tags:
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
subdir = docs
distdir: $(DISTFILES)
here=`cd $(top_builddir) && pwd`; \
top_distdir=`cd $(top_distdir) && pwd`; \
distdir=`cd $(distdir) && pwd`; \
cd $(top_srcdir) \
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu docs/Makefile
@for file in $(DISTFILES); do \
d=$(srcdir); \
if test -d $$d/$$file; then \
cp -pr $$d/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
for subdir in $(SUBDIRS); do \
if test "$$subdir" = .; then :; else \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
chmod 777 $(distdir)/$$subdir; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
|| exit 1; \
fi; \
done
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-exec-am:
install-exec: install-exec-recursive
install-data-am:
install-data: install-data-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am:
uninstall: uninstall-recursive
all-am: Makefile
all-redirect: all-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
mostlyclean-am: mostlyclean-tags mostlyclean-generic
mostlyclean: mostlyclean-recursive
clean-am: clean-tags clean-generic mostlyclean-am
#>- clean: clean-recursive
#>+ 1
clean: kde-rpo-clean clean-recursive
distclean-am: distclean-tags distclean-generic clean-am
-rm -f libtool
distclean: distclean-recursive
maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \
distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
maintainer-clean: maintainer-clean-recursive
.PHONY: install-data-recursive uninstall-data-recursive \
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
uninstalldirs-recursive all-recursive check-recursive \
installcheck-recursive info-recursive dvi-recursive \
mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
install-exec install-data-am install-data install-am install \
uninstall-am uninstall all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
#>+ 2
docs-am:
#>+ 5
force-reedit:
cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/Makefile
cd $(top_srcdir) && perl admin/am_edit docs/Makefile.in
#>+ 2
final:
$(MAKE) all-am
#>+ 2
no-final:
$(MAKE) all-am
#>+ 3
cvs-clean:
$(MAKE) -f $(top_srcdir)/admin/Makefile.common cvs-clean
#>+ 3
kde-rpo-clean:
-rm -f *.rpo
--------------3EA4FCCD631BBD7D624FCC74--