mvnForum Homepage

Print at Dec 18, 2014 5:35:44 AM
Posts: 33   Pages: 4   [ 1 2 3 4 | Next Page ]
View all posts in this thread on one page
Posted by ecclesiologyproper at Jun 18, 2010 2:14:02 AM
MacSword 2.2.4 wont open
1. I tried deleting all my caches and preference files related to MacSword , including the MacSword and Sword folders in my Application Support folder in home library.

that didn't work

2. I tried putting an empty folder "MacSword" in my
~/Library/Application \Support / Folder

that didn't work



I installed the application into

/Applications / MacSword/ MacSword.app


I also tried putting it directly into the Applications folder and still no go.





PC
====================================

Model: PowerBook5,4, BootROM 4.8.6f0, 1 processor, PowerPC G4 (1.1), 1.5 GHz, 1 GB
Graphics: kHW_ATIrv360M11Item, ATY,RV360M11, spdisplays_agp_device, 64 MB
Memory Module: SODIMM1/J25UPPER, 1 GB, DDR SDRAM, PC2700U-25330
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x4E), Broadcom BCM43xx 1.0 (4.170.25.8)
Modem: Jump, V.92, Version 1.0
Bluetooth: Version 2.1.9f10, 2 service, 1 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
PCI Card: TXN,PCIXXXX-00, cardbus, PC Card
Parallel ATA Device: MATSHITADVD-R UJ-825
Parallel ATA Device: Hitachi HTS541616J9AT00, 149.05 GB
USB Device: Bluetooth USB Host Controller, (null) mA




ERROR
====================================
Process: MacSword [36402]
Path: /Applications/MacSword/MacSword.app/Contents/MacOS/MacSword
Identifier: org.crosswire.MacSword
Version: ??? (???)
Code Type: PPC (Native)
Parent Process: launchd [185]

Interval Since Last Report: 4334 sec
Crashes Since Last Report: 3
Per-App Interval Since Last Report: 0 sec
Per-App Crashes Since Last Report: 3

Date/Time: 2010-06-18 18:04:23.089 +0900
OS Version: Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: 20D19FD3-430E-46FE-A356-3A7D069C6645

Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000001, 0x000000008fe0105c
Crashed Thread: 0

Dyld Error Message:
Library not loaded: @rpath/ObjCSword.framework/Versions/A/ObjCSword
Referenced from: /Applications/MacSword/MacSword.app/Contents/MacOS/MacSword
Reason: no suitable image found. Did find:
/Applications/MacSword/MacSword.app/Contents/MacOS/../Frameworks/ObjCSword.framework/Versions/A/ObjCSword: mach-o, but wrong architecture

Posted by chasm at Jun 18, 2010 3:41:25 AM
Re: MacSword 2.2.4 wont open
MacSword works fine on my MacBook Pro. The error is caused by a library inside of the application that is not compatible with the PowerPC architecture of your PowerBook. I confirmed this by launching MacSword under Rosetta, thus using the PPC compatible code rather than the Intel compatible code. I got the exact same crash. Perhaps some of the PowerPC code did not compile correctly.

EDIT: If I interpret the error message correctly, the cause of the crash is in the ObjCSword executable inside of the ObjCSword Framework.
----------------------------------------
<this signature intentionally left blank>

Posted by mdbergmann at Jun 18, 2010 5:29:33 AM
Re: MacSword 2.2.4 wont open
Yeah, the PPC executable is missing. I actually thought it was built including PPC but it seems not.
Have to rebuild.


Manfred

Posted by ecclesiologyproper at Jun 18, 2010 11:32:18 PM
Re: MacSword 2.2.4 wont open
I see.

Yes, I am on PPC still. Haven't had the cash to get an intel mac yet.

I guess I will have to just wait for the update.
Just knowing what the problem is helps a lot. I was going crazy trying to figure it out myself : ) thanks.
Thank you guys. God bless your work.
I am astounded at the amount of effort you programmers put into a project that pays nothing.
Thank you.

Posted by mdbergmann at Jun 21, 2010 3:16:17 AM
Re: MacSword 2.2.4 wont open
There is an update. It has the build number 1426:
http://sourceforge.net/projects/macsword/


Manfred

Posted by chasm at Jun 21, 2010 3:47:48 AM
Re: MacSword 2.2.4 wont open
This build crashes in Rosetta, but still runs fine in Intel native. I was unable to get a useful crash log. (seriously, the log displays no error message and ends with "NO CRASH LOG")

Considering that Rosetta may not be the absolutely perfect PPC compatibility test, there is possibly a faint chance it might work on a true PPC machine, but I doubt it will.
----------------------------------------
<this signature intentionally left blank>

Posted by mdbergmann at Jun 21, 2010 4:42:27 AM
Re: MacSword 2.2.4 wont open
Hmm. I don't currently have a PPC machine for testing available. Not until next week. All binaries however contain PPC code.


Manfred

Posted by ecclesiologyproper at Jun 21, 2010 12:09:05 PM
Re: MacSword 2.2.4 wont open
Thanks for the update.
It works great.

Posted by ecclesiologyproper at Jun 21, 2010 7:00:27 PM
Re: MacSword 2.2.4 wont open
actually : [

whenever I try to open any module in the workspace or in a new window the macsword brings my complete computer to a halt and I can barely forcequit out before having to shut down.

Posted by mdbergmann at Jun 22, 2010 12:53:56 AM
Re: MacSword 2.2.4 wont open
When you do force quit, is there maybe a crash log generated?
Version 2.2.3 and 2.2.4 contain some heavy changes in the build system. You can try version 2.2.2 until I can sort this out next week.

Manfred

Posts: 33   Pages: 4   [ 1 2 3 4 | Next Page ]